How To Zoom Out Piano Roll Fl Studio (2023)

  • How To Zoom Out Piano Roll Fl Studio Pattern
  • Player Piano Roll
  • How To Zoom Out Piano Roll Fl Studio 2

The Piano Roll is one of the central views in FL Studio. If you are not at all familiar with this view and other important views (such as Step Sequencer and Playlist), I recommend you first check out the tutorial listed below:

Recommended reading: Step Sequencer, Playlist and Piano Roll

Therefore, make sure that you do the barrel rolls and get all the air time that you can. Play aggressive, and don’t be afraid to get a little dirty.9. Go Airborne As Much As You noted that pulling off airborne tricks helps more than you think:This game doesn’t have “Airborne” in its title for no reason!

Now, assuming that you have a clue what the Piano Roll is about, we will have a closer look at the most common features it has to offer. While not discussing every cool feature, after this tutorial you should be able to create complex note event patterns quickly.

Let’s start with some concepts. Have a look at the screenshot below:

You may think ‘holy cow, that is a lot of stuff. Can I not just start drawing or something?’. We’ll come to that in a minute, but for the sake of understanding and making sure we ‘speak the same language’, I’ll first explain the concepts shown above.

  • Note events – this is what it is all about, to create patterns of note events. Each note event represents a note for the channel in question and controls when a sound will be played.
  • Keyboard – This is what it says it is, a keyboard. Helps you to place your note events.
  • Piano Roll options – Via this menu you can access various options for managing, arranging and editing your note event patterns.
  • Quick tools – A quicker way to get access to often used tools (also accessible via the Piano Roll options).
  • Toolbar – Has a set of buttons that determine the drawing mode you are in. Your possible options are Draw, Paint, Delete, Slice, Select, Zoom, Playback and Snap to Grid.
  • Target Channel – This shows the channel to which the Piano Roll applies. You can switch between channels in this drop down box.
  • Target Control – This shows the control that is currently displayed in the Integrated Event Editor (lower part of the screen). You can switch between controls in this drop down box.
  • Zoom time – Allows you to zoom in and out (horizontally, which represents the time).
  • Integrated Event Editor – The place where you can edit a number of note event properties, such as velocity, panning, etc.

Now that we can name and identify the main aspects, let’s approach it a bit differently. In essence, what we want to do in the Piano Roll is create a pattern of note events, for instance for our lead melody, bass line or drum beats. Have a look at the arpeggiated trance lead that I created:

(Video) Zooming Out More In Piano Roll - FL Studio 10 Tutorial HD

'Arpeggio is a broken chord where notes are spread out and played after eachother in a sequence rather than simultaneously. This is quite a common technique to which I will quite definitely dedicate some other tutorial. I use it here for the purpose of illustrating how to use the various tools in the Piano Roll.'

In the toolbar, click the Draw or Paint button. Then place a note event by left-clicking. Subsequently, move the mouse pointer over the right-edge of the note event until it changes. See below:

Left click and hold the mouse button down while you drag the pointer to the right. Release when the note event has the appropriate length. See below:

This is the how you change the length of a note event. Note that your selection in the Snap to Grid menu (in the toolbar) influences the increments in note event length. Try to play around with this a bit (e.g. choosing cell, line, 1/6 step, 1/2 step in the Snap to Grid menu) so you understand what Snap to Grid does.

Now, the Piano Roll remembers the properties of the last note event you worked with, so the following is a piece of cake.

I simply clicked the grid where I wanted my note events to start. If you happen to wonder how come I can see the entire progression, then that is because I used the Zoom time control to zoom out a little. Check out the first screenshot to find its location. You can zoom in and out by right clinking and while you hold down the mouse button use PgUp and PagDown. Alternatively, you can left click and while you hold down the mouse button you move the mouse up or down. Try this out because you will need it as your patterns become longer and more complex.

By the way, you will hardly place every single note event exactly where you want it upon first click, so moving note events around is one of the most common operations. Moving note events is done by placing your mouse pointer on top of the note event (having the Draw or Paint button selected), left click and while you hold down the mouse button move the note event. Nexus mod manager how to update mods for windows 10. See below:

OK, so now we have the basic progression. What I did next is chop the note events using the very handy Chop tool. To do this, you must first select all four note events. To select note events, you must first click the Select button in the toolbar. After that you can simply draw a box around the note events that you want to select (hold down the left mouse button and draw the box).

An alternative method is to left click the note events while you hold down the SHIFT key.

With the note events selected you can now apply operations to them simultaneously. What we will do is open the Quick tools menu and select Chop (or use ALT-U). This will have the following effect:

Cool isn’t it? You an tweak the Time mul knob on the chopper dialog so your new note events have the appropriate length. See below:

Now, select every second note event (hold down SHIFT key while you click on the note events) starting from the second note event. See below:

Now I move the selected events one octave up by holding down the CTRL key and pressing the ‘arrow up’ key on your keyboard. The whole selection moves up.

Play around a bit with these combinations: SHIFT ArrowUp/ArrowDown and CTRL ArrowUp/ArrowDown. You will see how easy it is to move your note events. Naturally, you can always move note events around as explained earlier, by simply dragging them to a new position.

The remainder I did by moving one or more note events at a time, so no magic features here.

Is this all? Well, no. But these are the basic operations that you will be using a lot. Let’s have a look at some of the other features.

(Video) FL Studio 20 How to Zoom In and Out

You can copy existing note events by using the Edit | Copy and Edit | Paste options in the Piano Roll options menu (or use CTRL-C and CTRL-V). First, select the note events you want to copy and then choose copy. See below:

Now that we have the Edit menu open, have a look at the other options (Cut, Copy, Paste, Delete, Delete all, Shift left, Shift right, Transpose up, etc.). We already tried the Transpose one octave up, remember? Well this is where these operations are hidden in the menus ;)

Ok, back to copying. After you have selected Copy, you can go back to the menu and select Paste. See below:

Now, be a bit careful. The copied note events are sometimes pasted on top of existing note events. See below:

Let’s transpose them up a bit (SHIFT ArrowUp).

Of course, I can move the note events to any place I want.

I mentioned it a bit earlier, note events have properties. More precisely, a note event has a a start time, a duration and settings for panning, velocity, note release, note filter cutoff frequency, note filter resonance and fine pitch. Start time and duration are determined by where you ‘draw’ your note event and how long it is, so do not worry about that. I do work with panning and velocity quite regularly, however, and these properties only get a default (or last used) value whenever you draw a note event.

There are two ways to edit note event properties: Either in the Integrated Event editor or in the Note properties dialog. Go ahead and double-click a note event (having the Draw or Paint button in the toolbar selected).

I rarely use this dialog though as it is cumbersome to set properties one note event at a time. Have a look at the screenshot below:

The lower part of the screen (with the vertical green bars) is the Integrated Event editor. Each bar reflects the velocity of the corresponding note event (the bar is placed directly under the note event). Why velocity? Well, have a look at the top of the screenshot. The Target control says ‘Velocity’. So now you understand the relation between the Target control and the Integrated Event editor.

The cool thing with the Integrated Event editor is that I can ‘draw’ in it. See below:

Simply left click at the left most bar and move the mouse to the right while holding down the mouse button. Beyond good and evil europe iso. You will see how you can quickly alter the velocity for a whole range of note events. Naturally, you can also click one bar at a time to adjust its height – thereby adjusting the velocity for one note event.

Well, the latter statement requires some more elaboration. If you have multiple note events that start at the same time (but with different pitch) then you cannot distinguish one bar from the other as the bars are placed directly below the note events. This implies you cannot manipulate them individually. That’s where the Note properties dialog comes in handy. So, while I typically use the Integrated Event editor, I do use the Note properties dialog sometimes in case note events overlap and I want to manipulate their properties individually.

I think I call it a day for now. There is much more to tell about the Piano Roll view, but I am sure I will cover them in other tutorials one way or another. I already promised you something on arpeggiating, didn’t I?

Hope this FL Studio tutorial was helpful to you. Feel free to leave any comments. Happy composing!

Category: FL Studio Basics,FL Studio Tutorial,Piano Roll

(Video) PPQ Tutorial - Increasing Zoom in Piano Roll - FL Studio 10

If you're looking for an FL Studio tutorial to get started making music with this powerful DAW, then you're in the right place!
So where do we begin?
With what seems like a million buttons, getting started can seem intimidating.
But there’s no need to fear! This article will guide you through the menus and tools in FL Studio’s interface, so you can learn everything you need to get started without opening up the manual!

The Menu Bar

The menu bar contains many useful functions and panels. You will find yourself using these windows frequently, so be sure to become familiar with the features and their locations.


File is an important section in FL Studio. Like most programs, the File tab is where you can create a new project, open a project, save a project, import/export a project, and quickly access recent projects.
While all these operations are standard ones that are easy to use, there is one important button you should know more about.
The one we’re referring to is called “New from template”. Clicking this will open an additional window. In this additional window, you can open a blank project with specific pre-determined features.
These pre-determined features include a kick, clap, hi hat and snare and the type of master output you’d like. Each template includes a description, so you can read through the different templates and select the one that best suits your needs.
Since you’ll be using this feature and the others located in the File tab frequently, we’ve laid out some of the hotkeys below for you to memorize:
This way, you’ll be able to save time throughout the creation process. It might not seem like much time, but when you’re constantly using these keys, you’ll be thankful for these shortcuts.
Open = Ctrl + O
Save = Ctrl + S
Save as = Shift + Ctrl + S
Save new version = Ctrl + N
Recent Projects = Alt + 1


The Edit tab is relatively brief but does contain very important controls. Undo, cut, copy, and paste are all incredibly important tools to use in FL Studio.
Using undo will erase your most recent action, which comes in handy when you make a mistake.
Cutting a selected object ‘cuts’ it off of your screen so that you can paste it somewhere else. You’ll use this often when you feel as though a piece of your track, like a snare or vocal, sounds better in another part of the song. It takes a lot of tries to get your track sounding completely cohesive, so this will be done regularly.
Using the copy function will simply allow you to duplicate a selection. This is great for when you finally create a beat you like and want to spread it throughout the entire track. All you would need to do is simply copy the beat and paste it throughout your song.
While using the Edit tab to implement these controls is acceptable, memorizing the hotkeys will be more favorable for your efficiency and workflow.
Undo = Ctrl + X
Cut =Ctrl + X
Copy = Ctrl + C
Paste = Ctrl + V


The add menu is very important, because it is where you can select VSTs to add to your composition. In other words, if you want to load a virtual instrument, this is one way you can load VSTs into your project.
Note that you’ll be able to do the same thing by clicking the “+” in the channel rack.
And to help you find the VSTs you’re looking for faster, toggle between categories, simple, and tree. This will change the way the VSTs are organized. Using the simple option keeps everything in alphabetical order, which is most helpful when hunting for a specific VST to select.
You can also click “More plugins..” to search for newly-downloaded VSTs.


The patterns section will allow you select different patterns that you create from the channel rack, which we will talk more about later in the article.
Alternatively, you can select patterns from the drop-down window above the playlist.


The View tab in FL’s menu bar will allow you to choose which windows are visible. This will help you keep things organized as you’re producing.
The first thing you need to know about this tab is that the windows that are currently open will have a black checkmark next to them.
You’ll also notice that there’s a toolbars section in the View tab. This will allow you to select which tools to include in the toolbar. This means you have the ability to remove certain sections from the toolbar should you want to make more room for other tools.
This will further help you stay organized, because you’ll be able to have your most used tools all in one place.
One of the most useful controls in the View section though, is the ability to close all windows. If your CPU starts to overload or things start to lag, simply click “Close all windows” to help things move steadily again!
The hotkey to close all windows is F12.


The options tab is where you can configure the settings within your DAW.
The MIDI settings can configure your MIDI devices and which ones are connected, while the Audio settings can control your inputs and outputs and so on.
Be sure to explore these settings to customize your production experience.


In the tools section, one of the most helpful options is the browser smart find.
Clicking this will allow you to search your browser for a specific sample. This is incredibly useful when you know you want a specific sample but can’t remember which folder it is located in.
From the tools section, you will also have the ability to quickly set up audio recordings or even create a random a riff melody for some instant inspiration.

? (Help)

The help section will provide you with miscellaneous resources to understand more about your DAW.
The help index will link you to a web page within Image-line’s reference manual, which will contain the answer to any questions you may have.
Additionally, this is where you can register FL Studio and find links to other various web resources!

Toolbar Panels

Next to the menu bar, you will find other useful tools.
Clicking the button to the left of the play/pause button will allow you to switch between playing a playlist audio or the audio from a pattern.
The play button will play/pause your song, and the stop button will set your playhead to the beginning of the playlist. The record button will allow you to record various information, such as MIDI and audio into your DAW.
Just below the play button, the horizontal line will allow you to drag your playhead position to different periods of time in your playlist. This way, if you’re working on one specific portion of your track, you’ll be able to playback only that portion instead of listening to the whole track.
The BPM (beats per minute) can also be adjusted in this section. This will be useful when trying to create a specific genre, which requires a specific BPM.
Lastly, the song position box will tell you where the playhead is located in minutes/seconds, or by beats if you click in the window. You’ll use this more than you think if you have a lengthy track (like a full mix) and can’t remember where you last left the playhead at.
Just below it is your pattern picker, which we will explain in more depth later on in the article.

The Browser

How To Zoom Out Piano Roll Fl Studio (2)

Here in the browser, you will find a multitude of important sections that are useful in creating your music. We will cover the most essential objects located in the browser section.

Current Project

The current project section of the browser will show you the resources and history from the project that is currently open.
By clicking on history, you can see all of the recent changes made in your project. Clicking on one of these will revert the project to the selected history’s data. This way, if you end up liking your first version of the song better, you can just simply restore it.
You also have the ability to select and view different patterns from here. Additionally, you can view the effect plugins, VSTi, and samples from your project in the current project section.
And finally, the remote control section is used for automation clips.

How To Zoom Out Piano Roll Fl Studio (3)

(Video) FL Studio 20 Hot Key : How to Zoom Horizontally in the Piano Roll

Plugin Database

The plugin database will allow you to select and browse both effect plugins and VSTi. Clicking and dragging them to the mixer or channel rack respectively will open the selected plugin.
You can also add new plugins with this section by clicking “more plugins” in the add section in the menu bar. Newly-found VSTs will be placed in the “new” folder for ease of access.


The backup section is very useful as it contains autosaved versions of your project. Should you chose to load one of the auto-saved versions of your project, simply give it a double click!


The packs section of the browser is where all of your samples will be organized. This is an incredibly useful section of the browser because most, if not all, of your percussion sounds will be located in this section.
FL comes with some stock samples, mostly residing in the Legacy folder. However it is crucial that you expand your sample library to add diversity to your tracks. If you need more samples, check out these

free downloads

It is important to keep these folders organized for ease of access to your samples.
Now that you understand the fundamental tools and their locations in the FL, let’s dive a little deeper!

Get access to over 10,000 sounds plus hundreds of courses & tutorials - Click Here

The Channel Rack

The Channel rack, previously known as the step sequencer, is where you can arrange drums and other sounds.
In its earlier versions, the main focus of FL was its step sequencer, which allowed the user to sequence sounds easily and intuitively.
Over the years, the sequencer has evolved into the channel rack, which is now much more advanced and versatile.
To sequence drums, try clicking on the grey and red buttons. Then play it back to hear what you create!
Each color change from grey to red represents each beat in the time signature. As you can see below, it has four beats. This is considered a 4/4 time signature.
The speaker icon next to “Channel rack” will play your pattern.
Just to its left, you will find a drop down menu containing folders. This allows you to organize samples and VSTs that you add by specific sections!
Even your automation clips will be categorized into their own folder! To create an automation clip, right click the parameter and adjust the anchor points of the generated clip to manipulate the automation.
The green ‘lights’ let you know that the corresponding channel is active. Clicking any green light will effectively mute the channel.
Similarly, holding ctrl while clicking on one of the green lights will solo the corresponding channel.
Next to the mute/solo lights, you will find the pan and volume knobs. More precise volume and pan controls can also be found in the mixer.
Clicking and dragging on the numbers to the right of the volume knobs will affect which mixer channel the elements are assigned to, which leads us into the next section.

The Mixer

The mixer is what all of your audio will funnel into.
Starting on the right side, you will notice ten slots. These slots are where you can apply channel effects like a reverb on a single channel, or a limiter on the master channel as seen in this screenshot.
Below the effects slots you will find an EQ (Equalizer). This EQ is useful for very quick fixes, but using an EQ plugin in the effects slots will always give you more control and flexibility.
In the middle of the mixer, you will notice inserts 1-125. Remember those numbers we talked about earlier in the channel rack? They correspond with the numbers in the mixer’s inserts so that you can apply EQ, reverb, delay, and many more effects to specific sounds!
Just like the channel rack, clicking the green ‘lights’ can be used to mute or solo the insert. This way you have control over the elements that you want to focus on while creating your track. This is crucial during the mixing process.
Below the mute/solo buttons, you will find a pan knob. Below the pan you will find a volume fader. Levels are one of the most important things to control to achieve a clean mix, so using the faders in the mixer is very important.
And of course, all the way to the left you will find the master channel. You can also view your master db from this section.

The Piano Roll

You might have seen videos of old pianos that can play music on their own.
Those special pianos are fed note information that tell it what keys to play and when.
In today’s digital age, producers can create music in a similar fashion with what is known as a piano roll.

How To Zoom Out Piano Roll Fl Studio Pattern

Piano rolls allow the user to sequence note information (known as MIDI). This is where you will write all of your melodies, chords, bass lines, etc.
To draw a note, simply click in the piano roll’s window.
Dragging the note up or down will change which key on the piano roll it plays, while clicking and dragging the end of the note left or right will make it shorter or longer.
Double-clicking a note will allow you to change its pan, volume, release, and even its numerical duration.
From the main menu drop-down menu, you can open MIDI files, export note information, create arps, generate ghost notes, and much more.
Take a look at the drop down menu and play around with the settings until they are configured to your liking!
To delete a note, simply give it a right click. Alternatively, you can select groups of notes with the select tool and hit your delete key to remove a large portion of notes at once.

The Playlist

The playlist is the last section that we will cover to help you get started with FL Studio.
In this section of the DAW, you will lay out all of the elements of your track.
The main menu (1) is similar in its controls to the piano roll, so check out its settings and configure them to your liking. You will find many useful tools here like snap settings and the ability to add time markers (2).
The tool bar is where you will find many useful controls for the playlist. To select a tool, simply click on it.
The magnet symbol (3) controls how the grid ‘snaps.’ The smaller the interval, the looser things will feel when you arrange them in your playlist. The larger the interval, the stiffer arranging objects will feel. Usually, keeping things on the stiffer side will make things easier to manage.
Next is the draw tool (4), which places your selected item in your playlist and instantaneously gives you the option to drag it left or right.
Similarly, the paintbrush tool (5) will allow you to click to add your item to the playlist, while dragging to the left and right will duplicate the item. This is useful for arranging percussion and patterns that repeat!
The delete tool (6) deletes anything that you click. Right-clicking objects will also delete them, even when the delete tool is not in-use.
The mute tool (7) will mute any object that you click without deleting it. Re-clicking the object will unmute it. An object will appear ‘greyed-out’ to let you know it is muted.
The slip tool (8) will allow you to shift the contents of a sample or pattern object left or right within the clip while retaining the duration and starting/ending points. Simply click and drag to ‘slip’ the content. This can be used creatively to mix and match audio samples.

How To Zoom Out Piano Roll Fl Studio (4)

The slice tool (9) slices objects into as many sections as you need. Simply click and drag the line generated by the tool vertically against the object to split it into multiple sections. This is useful for truncating bits of audio, instead of a tedious and repetitive click and drag of several objects.
Next, the select tool (10) selects objects. Click an object to select it, or click and drag to select many objects at once. You know an object is selected when it turns red.
The zoom tool (11) allows you to adjust the duration displayed on your playlist. Another quick way to zoom is to hold control + scrolling up and down.
The playback tool (12) will allow you to playback individual objects. To do this, simply click on the object.
To make selections, like the one shown in the image, simply right click and drag in the dark greenish/grey where the numbers of each bar are. This will create a red selection, and when played, this section will loop.
And finally, to deselect the section, simply double click on the timeline (bars).

FL Studio Tutorial - Conclusion

Player Piano Roll

Now that you understand the locations and features of the fundamental tools in FL Studio, it’s time to get your feet wet and start applying your knowledge!
But first, here are a few quick reminders:

  • Use FL’s hotkeys to be most efficient with your time.

  • The “Add” section of the menu bar is where you can add VSTi to your channel rack.

  • Your samples and VSTs will appear in the channel rack section and can be divided into several folders.

  • All of your audio is routed through the mixer, and can also be individualized to specific inserts.

  • The piano roll is where you will write your musical ideas.

  • Your objects will be sequenced in the playlist.

For a more in-depth FL Studio tutorial, check out the “FL Studio Essential Training Level 1: Beginner” course on
Check out this excerpt from the course taught by SeamlessR.
Right now, you can actually access this course and hundreds of others like it for free by clicking

(Video) How to Vertical Zoom Piano Roll Notes in Fl Studio


Now we want to hear from you!
What else would you like to see in an FL Studio tutorial?

How To Zoom Out Piano Roll Fl Studio 2

Let us know in the comments section below!

Download our free Ultimate Serum Library and improve your sound library today.


How do you Unzoom a piano roll in FL Studio? ›

Left-click on background to zoom out. When in other modes use (Ctrl+Right-Click) and drag to make a zoom-to selection. Right-Click again to swap between zoom and unzoomed modes.

How do I completely zoom out in FL Studio? ›

Zoom/Scroll - Click the mouse-wheel or middle mouse button and move up/down (zoom) and left/right (scroll).

How do I zoom out in studio? ›

Zoom by Selecting Hold [Alt]+[Shift], then draw a selection across the Arrange view to zoom in fully to that range. To return to normal zoom level, hold [Alt]+[Shift] and click in the zoomed area.
  1. Zoom In (vertically) Press [Shift]+[E].
  2. Zoom Out (vertically) Press [Shift]+[W].
  3. Zoom In or Out [Ctrl] + mouse scrollwheel.

How do you Unzoom fill? ›

Switch between full & partial screens
  1. From the top of the screen, swipe down to find quick settings.
  2. Tap Magnification. Magnification shortcut.
  3. Tap Magnification type. ...
  4. Move the slider to increase or decrease zoom.
  5. Optional: To switch between full and partial screens, you can also go to Settings Accessibility.

How do I Unzoom my keyboard? ›

Zoom using the keyboard

Press and hold the CTRL key, and then press either the + (Plus sign) or - (Minus sign) to make objects on the screen larger or smaller. To restore normal view, press and hold the CTRL key, and then press 0.

How do you zoom out? ›

You can also use the keyboard shortcuts to zoom in or out:
  1. Make everything larger: Windows and Linux: Press Ctrl and +. Mac: Press ⌘ and +. ...
  2. Make everything smaller: Windows and Linux: Press Ctrl and -. Mac: Press ⌘ and -. ...
  3. Use full-screen mode: Windows and Linux: Press F11. Mac: Press ⌘ + Ctrl + f.

How do I fit my screen to FL Studio? ›

If you have set your Windows 'System scaling' to work correctly on your monitor, say 200%, then FL Studio will be scaled correctly to 200% also. To adjust Windows system scaling open the Windows Control Panel, click on Display > Custom Sizing Options. From there adjust GUI zoom percentage selector.

How do you scale a piano fast? ›

Start by playing the first two notes of the scale moving up then back down. Go up the scales again, but add one more note, then come back down. Repeat the process, adding one additional note each time until you have added all 29 notes in the 4-octave scale, up and down.

How do you work out the scale of a key? ›

The easiest way to figure out the key of a song is by using its key signature. The number of sharps/flats in the key signature tell you the key of the song. A key signature with no sharps or flats is the key of C (or A minor). The table below summarizes the key signatures.

How do you Zoom out vs? ›

View > Appearance > Zoom Out (Ctrl+-) - decrease the Zoom level. View > Appearance > Reset Zoom (Ctrl+Numpad0) - reset the Zoom level to 0.

Which commands are used for zooming in and out? ›

Press and hold Ctrl and press - (minus) key or + (plus) key to zoom out or in of a web page or document. The - and + keys next to the backspace key, and on the numeric keypad, can be used.

How do I crop Zoom in audio? ›

How to edit and trim a Zoom recording on an iPhone or Android
  1. Select and upload your video from your phone's gallery using the + sign icon at the bottom right of your mobile app.
  2. Choose Edit and swipe left to select the recording's clip you want to trim.
4 Aug 2021

How do you make piano roll notes smaller? ›

Lengthening/Shortening notes in the piano roll editor
  1. Press Shift-Alt-Right Arrow to lengthen notes by the current rhythmic grid value.
  2. Press Shift-Alt-Left Arrow to shorten notes by the current rhythmic grid value.
  3. Press Ctrl/Cmd-Shift-Alt-Right Arrow to double the length of notes.

How do I resize a playlist in FL Studio? ›

Resize matters

In FL Studio 12.5 and later, use the Tools > Macros > Unlock all Playlist tracks from content > Also resize all playlist tracks to default size command to resize all Playlist tracks to 100%.


1. How To Resize Notes Vertically In Piano Roll In Fl Studio Hip Hop Beat Instrumental
2. Hot Key to Turn on the Zoom Tool in the FL Studio Piano Roll! #tutorial #musicproducer #flstudio
(Russi !)
3. How to Zoom to a Selection in the FL Studio Piano Roll! #tutorial #musicproducer #flstudio
(Russi !)
4. FL Studio 11 PianoRoll zoom problem. Doesnt save the settings
5. How to zoom in & out playlist in fl studio | Tutorial
(Soda Music)
6. FL Studio Piano Roll Basic Tips You Must Know
(LukiZ Music)


Top Articles
Latest Posts
Article information

Author: Fr. Dewey Fisher

Last Updated: 12/09/2023

Views: 5743

Rating: 4.1 / 5 (42 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Fr. Dewey Fisher

Birthday: 1993-03-26

Address: 917 Hyun Views, Rogahnmouth, KY 91013-8827

Phone: +5938540192553

Job: Administration Developer

Hobby: Embroidery, Horseback riding, Juggling, Urban exploration, Skiing, Cycling, Handball

Introduction: My name is Fr. Dewey Fisher, I am a powerful, open, faithful, combative, spotless, faithful, fair person who loves writing and wants to share my knowledge and understanding with you.